Let’s Animate a SPIKE Robot Chicken with synchronized motors in Python! 🐔
Have you ever wanted to make a robot chicken that can walk and peck like a real one? Well, today you’re going to learn how …
Hobby servo and LED with LMS-ESP32 and Pybricks on Chromebook
This tutorial gets you started with LMS-ESP32 and Pybricks. The challenge? Controlling a hobby servo, and a color led. You don’t even need to install …
Get Started with LMS-ESP32: Set the RGB LED from a SPIKE Hub
Eager to get started with your LMS-ESP32 board? This LMS-ESP32 starter guides you through setting the color LED using your SPIKE hub. Let’s explore how …
Development story of LMS-ESP32 version 2
Almost three years ago, we introduced the LMS-ESP32 board. It quickly became a favorite among hobbyists for extending their Lego Robot hubs. After building many …
HuskyLens on SPIKE Prime or Inventor: A Step-by-Step Guide
Connecting your HuskyLens to the SPIKE Prime or Robot Inventor hub opens up a world of possibilities in face recognition. Imagine your robot identifying faces …
LMS-ESP32 and LEGO EV3
LMS-ESP32 is a microcontroller board that acts as an intermediary between non-LEGO electronics and the LEGO MINDSTORMS bricks – LMS is short for LEGO MINDSTORMS. …
LMS-ESP32 v2.0: The new bridge for LEGO and electronics
When we launched the LMS-ESP32 v1.0, we were overwhelmed by the enthusiastic response from the community. The board sold out quickly, proving that there was …
HuskyLens Line Follower with EV3: A low code program
In this blog post, you will learn how to connect a HuskyLens to your LEGO MINDSTORMS EV3 and create a line follower robot. We will …
Lighting Astro Boy with a radar sensor and RGB NeoPixel LEDs
I wanted to add lights to my Astro Boy model, but it bothers me if the lights are on all the time. For this reason, …
EV3 OpenMV Camera Line Follower
The EV3 OpenMV line follower project combines the power of LEGO MINDSTORMS EV3 with the advanced vision capabilities of the OpenMV camera. This guide will …
